|
Adhesives
Acrylics
Aerosols
Anaerobics
Cyanoacrylates
Epoxies
Glue Dots
Hot Melt Adhesives
Methacrylates
Mold Releases
Sealants
Silicones
Solvent-Free
Structural Adhesives
Urethanes
UV Adhesives
Applicators
Accessories
Dispensers
Dual Dispensing
Epoxy
Hot Melt Dispensers
Hot Melt Bulk
Hot Melt Hoses
Hot Melt Rolls
Hot Melt Parts Nozzles/Parts
Motionless Mixers
Robots
Structural
Demonstrations
Bar Code Printer
Box
Printer
Equipment
Drum Unloader
Slot Die Applicator
Cold Glue Applicator
Fiberized Spray Pattern Controllers
Bulk Meters
Drum Meters
Adhesive Feeders
Metering Station
Supply Units
Service
Plan
Applications
Carton Sealing
Electronic Materials
Encapsulants
Green Adhesives
Magnet Bonding
Marine Adhesives
Medical Device
One Part Adhesives
Packaging
Potting
Robotic
Solvent-Free Spray
Space Age Adhesive
Surfacing Adhesives
Transportation
Woodworking
Literature
About Bonding
Data Sheets
Journals
Line Card
MSDS
Tech Menu
Meeting Customer expectations
and requirements is the main objective
of ISO 9001:2008
Customer Survey
We would appreciate your help so that we can provide
you with the very best in services. Your response will help us address the areas
of performance needing improvement.
CREDIT APPLICATION
| | Contact
Us
In this Issue: Sulzer Mixer
Nozzles
1-800-323-5158
| Glu Guru July 12,
2011 Journal
 ADHESIVE FOCUS NEWS
JOURNAL
The
Glu Guru welcomes you to
Cost Cutting Information helpful to your
Production and Packaging needs
|
SULZER MIXER NOZZLES
(Formerly CONPROTEC)
The most complete line of High Quality-Low
Cost Motionless Mixers!
STATOMIX ME &
MS STATIC MIXERS...When used
with
meter mix
equipment, provide a low cost solution for
two-component mixing. The mixer
element is molded of
polyacetal to withstand the higher pressures of meter mix
machines. Available with support washers to prevent the elements
from
extruding out the end of the housing when working
with
high pressure
applications. The outlet of the staic
mixer is
stepped, therefore, bead size can
be increased by
cutting the
tip. Suitable for all types of meter mix dispense
systems on
the market.
MC CARTRIDGE MIXERS.
..Developed for the MIXPAC 200 and
MIXPAC
400 systems. The mixer element was designed to
provide
less resistance while
dispensing. This minimizes
operator
fatigue. The MC Cartridge mixer can be
used with all
large
cartridge systems. They come in a wide variety of sizes and
will mix any 2-part material including epoxies, silicones, urethanes,
acrylics
and
polyesters.
MA
STATIC
MIXERS. ..Features simple twist-lock mounting. The MA mixers'
first element automatically aligns itself precisely with the dividing wall
of
the
MIXPAC 50cartridge, seperating Part A and Part B.
As a
result of this
patented design, the MA mixer prevents
curing
at the interface of the
cartridge. Available in a wide
variety
of sizes and will mix any 2-part material
including
epoxies,
silicones, urethanes, acrylics and polyesters. Also are used
for a wide range of low pressure meter mix
applications.
IN-LINE ALL STEEL MIXERS
...Especially suited for mixing
two-component
synthetic resin systems. These durable
stainless
steel mixers consist of
alternating left and right hand
helical elements which are brazed the entire
length of
the
tubular mixing housing. It needs to be cleaned
immediatelyafter
use.
IN-LINE
STEEL/FIBERGLASS
MIXERS...Developed as a low
-cost
alternative for mixing two-component synthetic
resins.
The mixing elements
are made of a high-grade, solvent
resistant plastic. A transverse rod at the
outlet end
of the
zinc-plated steel housing supports the elements. The low-cost allows
for
easy replacement and avoids unproductive cleaning should a
complete hardening occur within the mixer.
FOR MORE
INFORMATION AND/OR TO ORDER, CALL
1-800-323-5158
VISIT OUR WEBSITE AT www.gluguru.com
One Stop Source for Adhesives, Dispensers,
Accessories
© Copyright 2011 On-Hand
Adhesives, Inc All rights reserved
|
|
|
The Glu
Guru™
Adhesive Tech Center
