| SICOMET 85 is the standard for bonding metals
to rubber as well as ceramic and ferrite materials. Resistant to many solvents
and chemicals, this adhesive features a low viscosity for easy handling
and is best suited to close fitting parts. |
SICOMET 5010 is a high viscosity adhesive with
a faster setting time than most high viscosity cyanoacrylates. It offers
high elasticity, giving excellent bonds to dissimilar or porous materials. Facilitates
gap-filling and is high temperature resistance to 250 F makes it useful
in loudspeaker assembly. |
| SICOMET 7000 bonds metals to themselves or other
substrates. It has a medium and allows some positioning time. It is especially
useful for bonding slightly dirty or oily metals, and offers better moisture
resistance than most cyanoacrylates. |
SICOMET 5044 is suggested for bonding plastics
or porous materials where time is needed for part positioning. This product
offers high elasticity and is more suitable for bonding dissimilar materials
with different coefficients of thermal expansion. This adhesive provides
gap-filling and optimum flow control. |
| SICOMET 99 is a high viscosity for bonding metals
where gap-filling is needed. Slow setting, it allows maximum part positioning
time. It is well suited for bonding non-ferrous metals, giving good impact
and vibration resistance and thermostability. |
SICOMET 65 has a very high viscosity with a medium
set speed. It's suggested for bonding metals or plastics where maximum
gap-filling or drop-control is needed. Testing indicates good flexibility
and resistance to changing environments. With FASTAC accelerator, gap size
may be increased. |
| SICOMET 40 is a wicking grade adhesive designed
for bonding preassembled plastic parts. It features a very fast setting
time and gives a good wetting on difficult to bond plastics. It also has
been useful for bonding transformer laminates. |
SICOMET POWERGEL is an extremely high viscosity,
medium fixturing, single component, industrial quality instant adhesive.
Formulated to a clear gel and featuring non-stringing, non-migrating properties.
It is suitable for most substrates. |
| SICOMET 5023 features a moderately slow setting
speed and very low viscosity. An excellent product for post-assembly where
the adhesive must penetrate deeply into the preassembled parts. This product
is non-stringing and can be used in normal cyanoacrylate dispensing equipment. |
SICOMET 5181 is a high viscosity black adhesive
with a slow set speed. It is suitable for bonding porous substrates and
materials with different coefficients of thermal expansion. The repositioning
of parts and inspection of bonded assemblies is alos possible. |
| SICOMET 50 is the standard for bonding plastics
and offers a fast overall cure speed. It is a versital adhesive and gives
good thermal, climatic and impact resistance. This product elasticity makes
it especially suitable for bonding dissimilar materials. |
SICOMET 8300 is the standard adhesive for bonding
O-rings and rubber materials. It features a low viscosity and fast setting
time, joining hard to bond elastomers. It is highly resistant to aging,
weathering and plasticizer migration. |
| SICOMET 63 is a fast curing adhesive with a medium
viscosity, offering exceptional adhesion to plastic parts through good
wetting properties. An ideal adhesive for filling small gaps on plastic
surfaces. |
SICOMET 9000 Methoxyethyl is a low viscosity adhesive
that features no odor, non-frosting characteristics and formulated for
low blooming applications. |
| SICOMET 8400 is a fast curing, medium viscosity
material for the adhesion of most plastics and elastomers. It provides
excellent drop control and the ability to bridge small tolerances. An excellent
material for bonding most types of porous substances, such as foam rubber. |
SICOMET 9010 Methoxyethyl is a medium viscosity
adhesive featuring no odor, non-frosting characteristics where cosmetically
critical bonding methods are required. Eliminates the need for special
ventilation. |
| SICOMET 77 is a fast curing, high viscosity material
for plastic bonding and is suitable where high impact resistance is desired.
A good general purpose adhesive providing some gap-filling. It is useful
for a variety of materials such as wood, cork and leather. |
SICOMET 9020 Methoxyethyl is a high viscosity
adhesive featuring no odor, non-frosting characteristics where cosmetically
critical bonding methods are required. Eliminates the need for special
ventilation. |
Emai