|
| |
HOT MELT PACKAGING ADHESIVES FOR HAND HELD SYSTEMS
Available in pellet and shaped forms
|
Hysol
Product |
Softening Point |
Viscosity |
Open Time |
Description |
|
Quickpac |
224/107 |
@350F/177C
4,465cps |
Short |
Fast setting, low cost for corrugated |
|
Superpac |
208/98 |
@350F/177C
5,750cps |
Medium |
For sealing large corrugated cartons and foam
fabricating |
|
Waxpac |
226/108 |
@350F/177C
2,700cps |
Medium |
Flexible adhesive formulated to bond wax coated
cartons and withsatnd low temperatures |
|
Cool Melt |
208/98 |
@250f/121c
7,200CPS |
Medium |
A very low viscosity, flexible adhesive for
applications at low temperatures. Recommended for carton closing and styrofoam
packaging. |
HOT MELT PACKAGING ADHESIVES FOR BULK APPLICATORS
|
Product |
Viscosity |
Color |
Soft Pt |
Description |
|
SP100 |
1200 cps |
yellow |
105°
C |
Long open
time, slower set speed, packaging hot melt. Good adhesion to wide variety of
substrates.Poor hea7 resistance |
|
SP101 |
1150cps |
yellow |
117°
C |
Fastest
setting speed, good open time. Prime Packaging and Tray Forming recommendation.
Excellent heat resistance. |
|
SP109 |
1300 cps |
yellow |
111°
C |
Freezer
grade hot melt, with surprisingly fast set speed. Best sticker in product line. |
|
SP114 |
1050 cps |
CLEAR |
117° |
Polyethylene based case and carton hot melt. Fast setting, short open time. Excellent
balance of low temperature properties and heat resistance. |
|
SP115 |
1350 cps |
Yellow |
110ºC |
Fast
setting, longer open time packaging hot melt. Aggressive tack with good heat
resistance. Great range |
|
SPS229 |
6500 cps |
CLEAR |
94ºC |
Clear
version of SPS230 |
|
SPS230 |
6500 cps |
Yellow |
86ºC |
Standard
recommendation for permanent PSA labels. Excellent balance of hot and cold temperature
performance along with tack level, adhesion and strength. (USPS test results:
77 oz./inch before destruct). |
|
SPS237 |
9500 cps |
Yellow |
127ºC |
Primary recommendation for
product assembly applications. SAFT of 210ºF.
Excellent balance of tack and superior heat resistance. (USPS test results: 77
oz./inch before destruct). |
|
SPS238 |
1800 cps |
LIGHT
YELLOW |
80ºC |
Standard
recommendation for removable (fugitive) hot melts. Low staining, works on most paper
stocks. |
|
SPS262 |
5200 cps |
Yellow |
84ºC |
Low
viscosity permanent pressure sensitive assembly adhesive. It has excellent high tack
at low temperatures, ecellent bleed through resistance and very aggressive tack. |
|
SPS288 |
1500 cps |
CLEAR |
110ºC |
Prime
recommendation for removable (fugitive) hot melts. Low staining, works well on most
paper stocks |
USPS test involves applying an unidentified level of adhesive (we use 1
mil) to face stock then laminated to clean stainless steel and allowed to sit for 10
minutes. A 180 degree peel is then measured with a minimum acceptable level of 8 oz/inch
required with destruct bonds being preferred
HOT MELT LINEAL COVERAGE
Based on .096 specific gravity
|
Bead Size Diameter |
Lineal Ft/lb of resin |
Lbs/1000 lineal Ft. |
|
1/6" |
1568 |
0.6 |
|
1/8" |
284 |
3.5 |
|
1/4" |
135 |
7.4 |
|
3/8" |
88 |
11.4 |
|
1/2" |
65 |
15.4 |
COST COMPARISON CHART FOR CARTON CLOSING
Example Using Reinforced Tape
|
Cost/Cas e |
Rolls/Ca se |
Feet/R oll |
Feet/Case |
Cost/Foot |
Ft used/Carton |
Cost
per Carton |
|
$21.00 |
8 rolls |
375 feet |
375 x 8 = 3,000 ft |
$21 ÷ 3,000=$.007 |
5 feet/carton |
5 x .007=
$.035 |
Example Using Staples
|
Cost per
1000 Staples |
Cost Per
Staple |
No. of
Staples Used Per
Carton |
Cost
Per Carton |
|
$1.63 |
.00163 |
12 |
.00163 x12=$.019 |
Example Using Hot Melt
|
Hot Melt
Cost/lb. |
Feet/lb
using 1/16" bead -See table page 2 |
Cost per
foot |
Feet
Used Per Carton |
Cost
Per Carton |
|
$4.00/lb |
1568 ft |
$4.00÷1568=.$.002 |
4 ft |
$.002x4=$.008 |
COMPARE ANNUAL SAVINGS USING HOT MELT FOR CARTON SEALING
Example Hot Melt Vs Tape: 250,000 Cartons x 027(.035 less.008)=$6,750 Savings per Year
Example Hot Melt Vs Staples: 250,000 Cartonsx .011 (.019 less .008)=$2,750 Savings per
Year
HOT MELT GREAT FOR REPLACING MANUAL GLUING
![DynaMiniGun[1].jpg (54447 bytes)](images/DynaMiniGun1_small1.jpg)
Mail distribution houses produce a mailer that includes credit cards.
Pressure sensitive adhesive is applied to the back of the credit card to secure it to the
mailer. The Dynamini gear pump system allows precise delivery of a specific amount of
glue. Easier for the operator. It is cleaner, safer and less expensive than manual gluing.
Less adhesive is used and faster than manual gluing. And there is no setup time using Hot
Melt Adhesive.It is also upgradeable-can be converted to an automatic operation with
little additional cost. Contact the Packaging Hot Line at 1-800-323-5158
|
Emai
![DynaMiniGun[1].jpg (54447 bytes)](images/DynaMiniGun1.jpg)
